Description
Make sure that the pin on the lockable gas spring is not pressed in when the control unit (with lever) is screwed onto it; otherwise, the gas spring will not lock. The extension, when screwed onto the gas spring, is therefore 35–45 mm.
Handle with control unit (straight)
£19.14
In stock
Lever with control block (straight version) for the lockable gas springs 10-28 Stroke 80, 10-28 Stroke 130, 10-28 Stroke 180, and 10-28 Stroke 180 Long. This product can only be used in combination with a lockable gas spring from Hahn/Protempo.
The dimensions of the block are 15 mm x 15 mm x 43 mm.
The hole in the control block has a diameter of 8 mm. The center of the hole is located 35 mm from the end. The lever is 160 mm long.
